C D International, Inc. Your Balancing Correction Weight Specialist

PRODUCTS

Balancing Accessories

C D International is proud to offer a number of accessories as well as trial weights to make your balancing job easier. There are a number of items such as our Balancing Wax as well as Balancing Machine Drive Belts. For specialized tools like the Balancing Correction Weight Installation Tool , see our Balancing Accessory Tools page. If a product you need is not listed on this page, please contact us and we would be happy to source it for you.

Adhesive Backed Lead Balancing Weights for Sheaves

These adhesive weights come in strips of blocks that can be broken apart to achieve the final correction weight. Each block is stamped with its weight. Sheaves should be balanced to compensate for the sloppy run out tolerance allowed by most manufacturers.
In some cases an inaccessible fan can be balanced on the sheave.

Part #	Description	Price
AW-60	One strip of 4 x 10 gram blocks interspersed with 4 x 5 gram blocks, totalling 60 grams	16.00
AW-84	One strip 7 gram blocks totalling 84 grams	16.00
AW-84T	One strip of 12 x 7 gram thin blocks totalling 84 grams. For tighter radius.	16.00
AW-168	One strip of 12 x 14 gram blocks totalling 168 grams.	16.00

Accessory Materials

Part #	Description	Price
GBRT	Glass Bead Reflective Tape - each roll 1/2" wide by 5 ft. long	26.00
BC	Balancing Clay - 1 pound package; excellent trial weight	15.00
BW	Balancing Wax - Boflex - 1pound slab; suitable for higher RPM, more adhesive than clay	25.00
CC-10	Carrying Case; deluxe adjustable, two sided opening	59.59

Literature
Machine Balancing Manual - One of the best books written exclusively on vibration analysis and balancing rotating machinery. Please click on the image for much more information about his valuable resource.

Balancing Machine Drive Belts
The flex proof seamless joining system creates a belt that is free of thickening and hardening.
This has a favourable effect on the running behaviour of the belt and reduces noise levels.
C D International balancing machine belts are designed for low noise, high efficiency and energy saving power transmission independent of pulley diameter.

To order, simply provide us with the belt length (circumference) and width in inches.
Please allow up to two weeks for shipment.

Belt Width	Price per Inch (Length)
Up to 1 inch	$0.80 / inch
Up to 2 inches	1.30 / inch
Up to 3 inches	1.60 / inch

**Top of Page**

©2005 CDI, Inc. webmaster@balancingweights.com This website is optimized for the latest version of Internet Explorer.
Go here for the latest version... Internet Explorer