C D International, Inc.
Your Balancing Correction Weight Specialist
|
|
PRODUCTS
|
Steel Balancing C-Clamps
(scroll down) are used as permanent correction weights on
vane
axial flow fans and squirrel cage fans. They have a serrated surface
opposite the set screws that provides additional holding
power.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Replacement Weights |
|---|
|
Part # |
Throat Size |
Description |
Price |
|
AC-004 |
3/16" |
1 x .04 ounce |
8.95 |
|
AC-01 |
5/16" |
1 x .10 ounce |
8.95 |
|
SC-25 |
5/16" |
1 x .25 ounce |
8.95 |
|
SC-50 |
5/16" |
1 x .50 ounce |
9.25 |
|
SC-75 |
5/16" |
1 x .75 ounce |
9.25 |
|
SC-1 |
7/16" |
1 x 1.0 ounce |
9.25 |
|
SC-150 |
7/16" |
1 x 1.5 ounce |
9.50 |
|
SC-2 |
5/8" |
1 x 2.0 ounce |
9.50 |
|
SC-3 |
5/8" |
1 x 3.0 ounce |
9.50 |
|
SC-4 |
5/8" |
1 x 4.0 ounce |
9.50 |
|
SC-5 |
3/4" |
1 x 5.0 ounce |
10.50 |
|
SC-6 |
3/4" |
1 x 6.0 ounce |
10.50 |
|
SC-7 |
3/4" |
1 x 7.0 ounce |
10.50 |
|
SC-8 |
3/4" |
1 x 8.0 ounce |
10.50 |
Double Sided Set Screw C-Clamps **Top of Page**
These severe-duty balancing
correction weight C-clamps are designed for harsher
environments or high surface speed. They have set screws on both jaws making them ideal for
use in these situations or where fan blades may be corroded or other wise difficult to
secure a weight to. The set screws on one side of the C-clamp are
tightened until the fan blade is locked in between the set screw points and the
serrated surface on the other side of the clamp. The second set of screws
on the other jaw are then tightened to further secure the weight.
|
Part # |
Throat Size | Description | Price |
| DSS-SC-2 | 5/8" | 1 x 2.0 ounce | 12.50 |
| DSS-SC-3 | 5/8" | 1 x 3.0 ounce | 12.50 |
| DSS-SC-4 | 5/8" | 1 x 4.0 ounce | 12.50 |
| DSS-SC-5 | 3/4" | 1 x 5.0 ounce | 16.95 |
| DSS-SC-6 | 3/4" | 1 x 6.0 ounce | 16.95 |
| DSS-SC-7 | 3/4" | 1 x 7.0 ounce | 16.95 |
| DSS-SC-8 | 3/4" | 1 x 8.0 ounce | 16.95 |
Stainless Steel Balancing C-Clamps
The Stainless Steel C-Clamps are made from 303 stainless steel and are used as permanent correction weights on vane axial fans and squirrel cage fans
Pre-Packaged Set
| STSC-KIT |
Complete Set:
22 pieces, 2 of each clamp.125 - 8.0 ounces |
349.95 |
| Replacement Weights | |||
| Part # |
Throat Size |
Description |
Price |
| STSC-125 | 3/16" | 1 x .125 ounce | 16.00 |
| STSC-25 | 5/16" | 1 x .25 ounce | 16.00 |
| STSC-50 | 5/16" | 1 x .50 ounce | 16.00 |
| STSC-75 | 5/16" | 1 x .75 ounce | 16.00 |
| STSC-1 | 5/16" | 1 x 1.0 ounce | 16.50 |
| STSC-2 | 5/8" | 1 x 2.0 ounce | 19.00 |
| STSC-3 | 5/8" | 1 x 3.0 ounce | 19.00 |
| STSC-4 | 5/8" | 1 x 4.0 ounce | 19.00 |
| STSC-5 | 3/4" | 1 x 5.0 ounce | 21.00 |
| STSC-6 | 3/4" | 1 x 6.0 ounce | 21.00 |
| STSC-8 | 3/4" | 1 x 8.0 ounce | 21.00 |
Balldriver L-Wrenches for Use with Balancing SC-Clamps
These wrenches are made from Protanium to withstand high torque
and wear. The full set
(Part # HW-BDS) contains all eight sizes. The four
sizes required to tighten all of the balancing correction C-clamps
are also sold individually.
| Part # |
Description |
Price |
| HW-BDS |
Balldriver L-Wrench Set; all 8 sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 |
15.00 |
| HW-1/16 |
One Balldriver L-Wrench; Fits
AC-004 through |
1.50 |
| HW-5/64 |
One Balldriver L-Wrench; Fits SC-50 through SC-75 |
1.50 |
| HW-3/32 |
One Balldriver L-Wrench; Fits SC-1 and SC-150 |
1.50 |
| HW-1/8 |
One Balldriver L-Wrench; Fits SC-2 through SC-8 |
1.50 |
|
©2005 CDI, Inc.
webmaster@balancingweights.com
This website is optimized for the latest version of Internet Explorer. |
Internet
Explorer